Surge Tank
A Surge Tank is an attachment to a pressurized system designed to accommodate pressure changes. The purpose of a surge tank is to neutralize rises and falls in pressure to prevent system failures, blowouts, and other problems. Capacities – 70 Cu.ft. and 100 Cu.ft.
Batch Mixer
The Himech Batch mixing system is excellent in mixing technology, which includes a batch mixing tank. This system can be used for all cement, flush and spacer mixing operations. Batch Mixing tank with agitators allows the batch mixing of cement for plug and squeeze and allied cementing jobs Batch Mixers are supplied with control console, […]
Cement Carriers
Himech manufactures Cement Carriers which are of Truck mounted or Trailer mounted type that can be manufactured with or without surge tank as per requirements.Cement Trucks are manufactured as per ASME Sec VIII DIV I All the Cement Carriers manufactured by Himech work on Dense Phase Technology ensuring a smooth and constant flow of cement […]
Mobile bulk cementing units
Himech’s MBCU is an independent unit used to transport dry cement from Bulk Handling Plants and to be directly hooked up for cementing job at the drill site with the cementing unit. It comprises of a powerful Screw Compressor, Coded pressure vessel, Surge Tank ,Piping and valves and it gives a constant rate of discharge […]
VARIOUS PIPING
The different elements of a well testing layout are connected together with piping to provide the flow path for the effluent. The piping consists of different sizes of rigid pipes and hoses which are selected according to their working pressure, flowrate, and the relative movement between the elements
TRANSFER PUMP
The transfer pump allows the transfer of oil from a tank to a burner or an existing flowline and even to a tank trailer. The equipment will be supplied in complete skid. Gear, screw, and centrifugal pump designs are available.
DATA HEADER
During well testing and flow back operations, the data header is used to connect the instruments and sensors for data acquisition, and the collection of fluid/ gas samples Data header is located directly upstream of the choke manifold and downstream of the surface safety valve (SSV) and provides access to the flow stream for pressure […]
ESD VALVES
Emergency ShutDown Valves (ESDV) for well testing applications are generally reverse acting gate valves equipped with a hydraulic linear actuator. In offshore applications this valve may be incorporated into a flowhead, but for lands use are normally skid mounted and installed close to the wellhead. For single well tie-ins, a wellhead ESD valve is usually […]
OIL & GAS MANIFOLD
Oil and gas manifold diverts oil or gas, without flow interruption, from the separator to crude oil burner for disposal, to surge tank or gauge tank for measurements or storage, or to a production line. Oil and gas manifold also isolates the test equipment to prevent flow interruption if the testing equipment is pulled out […]
STEAM HEAT EXCHANGER
During well test operations the steam heat exchanger is used to increase the temperature of the well effluent to prevent hydrate formation, reduce fluid viscosity, breakdown emulsions, and assist the separation of fluids in the separator. A steam generator feeds hot steam into the shell side of the heat exchanger. Well effluents flow into the […]
